Network · Carrier-neutral backbone

600G domestic, 7.2 Tbps international capacity.

Our backbone carries 6 × 100G links from three independent domestic carriers and 7.2 Tbps abroad over six transit providers and exchange points. Every link arrives on a physically separate path.

600G
Domestic upstream
7.2 Tbps
International capacity
3 + 6
Domestic carriers + global links
100G
Capacity per link

Capacity

Capacity by carrier and link

Domestic capacity

600 Gbps

3 carriers · 6 × 100G links, each on its own path

CarrierPortCapacity
Türk Telekom2 × 100G200 Gbps
Vodafone2 × 100G200 Gbps
GibirNet2 × 100G200 Gbps

International capacity

7.2 Tbps

6 carriers and exchange points · EternalGuard runs on this capacity

CarrierTypeCapacity
GTTTransit2.5 Tbps
RETNTransit2.5 Tbps
BelCloudTransit800 Gbps
GNM-IXPeering600 Gbps
BIX.BGPeering600 Gbps
TurkIXPeering200 Gbps

Figures are total committed port capacities.

Architecture

Built against single points of failure

When a link or a provider has trouble, traffic moves to the other paths by itself. That is what BGP routing and redundant core switching are there for.

Multiple carriers

Türk Telekom, Vodafone and GibirNet in one facility; you depend on none of them alone.

Path diversity

Carrier links arrive on physically separate routes; one roadworks accident cannot cut all connectivity.

Low latency

The shortest network path to most users in Türkiye runs through Istanbul, and BGP policies are tuned for it.

Automatic failover

Redundant core switches and BGP move traffic to another link during a failure, with no manual step.

DDoS protection on the backbone

EternalGuard scrubs attack traffic where it enters the network; only clean traffic reaches your rack.

Room to grow

From a 1 Gbit/s port to 10 Gbit/s, from a single IP to your own block; raise capacity as you need it.

IP Transit

Announce your own AS or use ready IP space

Your link is 1:1 symmetric: upload and download speeds are equal and dedicated to you, with no traffic quota. Bandwidth is measured at the 95th percentile (p95).

  • Full BGP session for your own AS number and IP block
  • IPv4 and IPv6 together (dual stack)
  • Redundant routing over several upstreams
  • Committed or usage-based (burstable) model
  • 95th-percentile metering and live traffic graphs in the panel
  • Transit traffic passes through EternalGuard

With a full rack, 100 Mbit/s has a list price; higher speeds are quoted to fit your needs.

Cross Connect

A direct link that never crosses the internet

Connect your rack to the carriers in the facility, to another rack or to cloud providers over a physical line. Zero hops in between, lowest latency.

In the facility

Between two points in the same data center, rack to rack or to the meet-me room.

  • Copper (Cat6) or single / multi-mode fibre
  • 1G, 10G and 100G ports
  • Traffic isolation with a private VLAN
  • Labelled and documented cabling

Outside the facility

To a carrier point of presence or another data center, over metro fibre.

  • Türk Telekom, Vodafone and GibirNet hand-off points
  • Layer 2 transport, 1G / 10G / 100G
  • Redundant path (A/B) option
  • We handle carrier coordination

Cloud connectivity

Private links to cloud providers for hybrid architectures.

Isolated traffic

Cross-connect traffic is fully separate from the public network.

Fast turn-up

In-facility links are usually ready the same business day.

Because the price depends on distance, cable type and hand-off point, cross connects are priced by quote.

Frequently asked questions

What does 1:1 symmetric internet mean?

Upload and download speeds are equal and dedicated to you. On a 100 Mbit/s symmetric link both directions are 100 Mbit/s, and that capacity is not shared with anyone.

How does 95th-percentile (p95) metering work?

Your usage is sampled every 5 minutes through the month, the top 5% of samples are dropped, and the highest remaining value is what is billed. Short spikes do not affect your bill.

Can I announce my own IP block?

Yes. If you have your own AS number and IP block (at least a /24), we set up a full BGP session and announce your block over our backbone.

What happens if a carrier goes down?

Traffic is routed to the other carriers over BGP. Because links arrive on physically separate paths, a single failure does not cut all connectivity.

What port speed do I get?

Every colocated device gets a 1 Gbit/s port as standard. A 10 Gbit/s port is available for heavy traffic, and a full rack includes one.

Let's size your connectivity together.

Tell us about your port speed, bandwidth, IP and BGP plans, and we'll work out the right setup.